Here’s all that you need to know about Troubleshooting your Hot Water System!

other

Written by:

Waking up to a cold shower is one of the biggest nightmares for any bather ever. That also applies to when you are back from a long day at work and are in dire need of a long hot shower. It’s anything but fun! But the good part is – it’s almost avoidable, if you know how to go about it correctly. And the key to success is a properly maintained and perfectly working hot water system. But, it’s not as easy as it sounds. A hot water system is one of the most important appliances in our homes/offices, and is prone to breakdowns just like everything else.

It’s often that our hot water systems become damaged, unsafe or inefficient — that too without giving us the slightest hint. This can happen anywhere, anytime, making us believe all over again, that understanding our hot water systems can be quite tricky. But no worries! We are here, and we are happy to help. We will provide you all the advice that you need to save up on time and money when it comes to hot water problems. But, do remember, this is all about minor troubleshooting. In no way should you attempt to repair any part of the hot water unit yourself. For all such serious hot water system repairs in Perth, A. Able Plumbing, Gas & Hot Water will come to the rescue. They are the most experienced reliable and affordable plumbers in Perth, and will get your hot water system back on track in no time.

Ways to troubleshoot your hot water system:

Keeping your hot water system up and running is very important, especially if hot showers are one of the greatest love of your life. You can call up an emergency plumber in Perth to help you with that, anytime of the day. But there are certain situations which you can bring under control, with only a few important steps. Whether you have a gas water heater or an electric one installed in your home, we have the answers to all your problems.

  • Leaking gas hot water cylinder: What’s the first thing you should do when you notice a gas or water leakage? You turn the gas and water off at the system. Only half a turn is needed to turn off the gas cock. If you continue to smell gas, turn off the gas mains at the gas meter at the house front. Turning off the water stop cock will reduce or stop the unwanted flow of water. This should pretty much control the situation till help arrives.
  • Leaking electric hot water cylinder: Are you as confused on seeing a leaking or tripping water heater? Don’t be! You just need to turn off the electricity supply to the system ASAP. After that, try to identify the cause of the leakage. The most probable solution will be to turn off the water stop cock at the hot water system. This will effectively lessen or stop the water flow. And now, you can call over your trusted professional who will make sure that your system is back to normal.
  • Water leakage from PTR Valve: First and foremost, you need to make sure that the water flow is much greater than the normal gentle discharge. Also be very careful, as the water will be scalding hot — so children should be kept far away. You need to gently raise the valve lever and again lower it back into position. Repeat this for two or three times so that any present obstacle might be removed. If the water continues to flow, turn off the gas cock and the water stop cock.
  • No hot water through the taps: The very first thing that you need to check is whether the problem is limited to just one tap or more taps. Check out the cold water taps as well. You should also check for any signs of broken pipes or leaking cylinders.

So, these were some of the most common hot water problems that you can come across on a daily basis, and how you can control the situation till help arrives. For anything that seems beyond your comprehension, it’s time to call over the professionals. And when your hot water system is back on track, you can go back to enjoying your hot shower.

Leave a Reply

Your email address will not be published. Required fields are marked *